Want to help get my engine back together?

[TexasEd]

I need some help with a few things and I've got all the parts to get the engine running again. The main things I'll need help with are:
- properly sealing and setting the intake manifold
- properly sealing and setting the water pump and thermostat
- re-installing the distributor
- installing and tuning the carburetor
- adjusting timing

I need to make sure I seal the right sides of the gaskets, not too much sealant, torque the bolts properly, etc. I've installed a new water pump on my pickup before but haven't done the other stuff.

I'm able to work on it most week nights from around 8:00 to midnight and Saturday evenings too.

I live in the Cedar Park/Lakeline Mall area.
Let me know if you can help, thanks!

[TexasEd]

I'm going to try to get started this week in the evenings.

I'm thinking about pulling out the radiator and trying to back flush it (upside down). What about putting vinegar in it to soak? Any thoughts?

[65stang]

I wish I could help you, but I don't think I'll be able to.

I'm not sure if soaking the radiator in vinegar is a good or bad idea.

I usually just flush them out the best I can.

[TexasEd]

bump

still trying to knock this out. need help with iron intake.